MaxPERF Drilling Tool 
APPLICATIONS

• To penetrate beyond the invaded zone in wells with near-wellbore damage
   
• To increase the effective wellbore radius, reducing drawdown and helping to prevent coning
   
• To eliminate the risk of casing or cement damage caused by explosive perforating - MaxPERF causes NO casing or cement damage
   
• To re-enter a productive interval following a remedial cement squeeze - allows access to the pay without risking damage to the newly placed cement
   
• For completion or reworking of thin zones or zones with poor boundaries where further stimulation is risky
   
• Frac Initiation - for zones that are difficult to breakdown or exhibit high treating pressures due to excess perforation friction pressures
   
• To eliminate the need for a frac or acid stimulation in wells where only the near-wellbore area must be penetrated
   
• To improve injection rates in injection, steam injection and disposal wells
   
• Intersect fractures - completion or recompletion of fractured reservoirs or coal bed methane wells
   
• To access new formation pay using light, clean, compatible completion fluids
   
• Help to induce oil/sand movement when completing or reworking CHOPS wells
   
• WHAT IS YOUR APPLICATION?
   

MaxPERF Drilling Tool
ADVANTAGES

• Run MaxPERF drilling tool on jointed or coiled tubing
   
• Flowpaths drilled up to 72 inches deep and 0.70” diameter
   
• Deeper, larger flowpaths – material is removed by a non-damaging drilling technique
   
• Flowpaths ideal for accessing formation past near well-bore damaged zone – after remedial cement squeeze
   
• Flowpaths ideal for FRAC initiation or SELECTIVE acid treatments
   
• Flowpaths ideal for thin or streaky zones – especially with a close water contact
   
• Casing Milling (1.0” casing hole) – access annulus between 2 strings of casing with no damage to outer string
   
• REAL TIME hydraulic indicators reveal tunnel information – for each and every flowpath